Korzystając ze strony wyrażasz zgodę na używanie cookie, zgodnie z aktualnymi ustawieniami przeglądarki. OK
ISSN - 2391-9361

Volume 6, issue 6
SYSTEMY WSPOMAGANIA W INŻYNIERII PRODUKCJI
INŻYNIERIA SYSTEMÓW TECHNICZNYCH

Edition circulation: 130 copies

 
Contents

  pobierz
1 vol. 6, iss. 6/1

Celina BARTNICKA, Radosław CZYŻ
The survey of employee satisfaction of flexible forms of organization of working time

Abstract: The Employers increasingly give employees the possibility of using flexible forms of organization of working time. It becomes a privilege for employees. System like that provides for employees work-life balance, gives psychological comfort, satisfaction and affects on their willingness to continue careers in the company, which is a benefit for both: the employee and the employer. The work provides an overview of the most commonly used forms of organization of working time. The article presents the results and conclusions of a survey, which the purpose was to check employee satisfaction of flexible forms of organization of working time.

Keywords: working time, employee contentment, employee satisfaction, work system
p. 11 pobierz
2 vol. 6, iss. 6/2

Witold BIAŁY, Michał MOLENDA
The educational cooperation in Poland - Czech Republic with use of eu funds - case study

Abstract: The paper presents the way of implementing cross-border cooperation in the field of exchange of experiences between universities located on both sides of the border. The use of mathema-tical methods in production engineering are the subjects concerned in the cooperation. The common activities and experiences of each party should indicate directions for developing new or modifying existing mathematical methods. As a result of these efforts, mechanisms will be implemented to bring existing mathematical rules into line with needs and conditions, taking into account the technologi-cal, organizational and structural differences that occur between neighboring countries. The article presents the actions taken by the universities educating engineers: Silesian University of Technology (Poland) and the Higher School of Mining and Metallurgy in Ostrava (Czech Republic). To achieve this, the EU funds under the Structural Funds were raised. The project is cofinanced by the European Regional Development Fund "Przekraczamy Granice" and from the state budget of Poland. The main objective of the project are conferences involving project developers and entrepreneurs, service pro-viders from the border area (support area).

Keywords: education, quality of education, production engineering, Polish-Czech
p. 23 pobierz
3 vol. 6, iss. 6/3

Jarosław BRODNY, Kinga STECUŁA, Dorota PALKA
Application of it tools to study the effectiveness of the use of mining machines

Abstract: In order to objectively and reliably determine the effectiveness of machines, it is necessary to use data recorded by the industrial automation systems. At present, these systems are very expanded and register many parameters of the machines’ work. This data is used mainly to diagnose the work of these machines. The paper assumes that this data will be the basis for determining the effectiveness of machines. A large amount of this data requires the use of the appropriate IT tools for archiving, synchronizing and analytically processing. The article discusses the basic tools which can be used in this process and shows an example of their practical use. These tools are databases, data warehouses and IT platforms. Their practical use is presented in the example of a longwall shearer and armoured face conveyor.

Keywords: effectiveness of machines, data warehouses, IT platforms, OEE model
p. 36 pobierz
4 vol. 6, iss. 6/4

Piotr DUBICKI, Urszula LEWANDOWSKA, Joanna RATAJCZAK, Adrianna TARNAS
Lean Management as an instrument of responsible business

Abstract: The paper presents the issue of Lean Management as an instrument of responsible business. The article goes back to the origins of Lean Management and discusses the ways in which it exerts impact on the improvement of the efficiency of the activity of organizations. Furthermore, the essence of responsible business is discussed as well as the role of Lean Management as one of the instruments of responsible business.

Keywords: lean management, responsible business, social responsibility
p. 48 pobierz
5 vol. 6, iss. 6/5

Łukasz DZIEMBA, Stefan SENCZYNA
Process model for planning and production control in an enterprise supported by the ERP functions

Abstract: The production enterprise environment is the customer's expectation of effective and timely fulfillment of their needs. It makes ERP IT systems a key tool in improving and enhancing management. The paper presents process models as a method of improving management by extending the support of an ERP system. The first part describes the organization of the production department and the flows and processing of information. The second part presents conceptual models, based on the assumptions of structural analysis. Interpretation of conceptual models of processes, in publica-tions are planning and production control models, is a method of linking the functions of the ERP system with the organization and processes of information processing. This gives you the opportunity to improve your management using an ERP system based on the skills of your company.

Keywords: organization, planning and controlling production, process models
p. 56 pobierz
6 vol. 6, iss. 6/6

Łukasz DZIEMBA, Stefan SENCZYNA
Mapping ERP functionality to enterprise organization using the structural model

Abstract: The functionality of ERP systems allows you to cover all areas of the company's support activities. This is the basis for improving the management of the company and achieving efficiency in meeting the needs of the environment. Process models, presented in the publication, aim to make better use of the functionality of ERP systems in supporting the company on the example of customer service. Process models were created using structural analysis in business process modeling.

Keywords: ERP, information system, process models, business process
p. 69 pobierz
7 vol. 6, iss. 6/7

Anna GEMBALSKA-KWIECIEŃ
Motivation tools

Abstract: The presented paper discusses the subject of motivation and the tools used for this purpose. This topic is important in business management because an effective motivating system makes the employee run his full potential to accomplish the tasks and objectives set by the organization, resulting in a company having a better chance of achieving them. The paper presents basic concepts and definitions of motivation, process characteristics and selected motivational theories. Additionaly it shows the division of motivators, including salary and non-wage measures of motivation.

Keywords: management, motivation, motivation tools, motivators
p. 79 pobierz
8 vol. 6, iss. 6/8

Bartosz GŁOWACKI
Energy efficiency operational indicator as an element for planning the trip of fishin vessel

Abstract: The use of the energy efficiency operational index to analyse the operational efficiency and planning of fishing vessels trips is an innovative solution. This article presents authoring software dedicated to this type of vessel, allowing online collection of data describing the course of the trip and individual activities performed by the fishing vessel. Correct interpretation and correlation of technical and operational parameters with the use of this program will allow to obtain data allowing to evaluate the energy efficiency, taking into account technical condition of the unit under any operating conditions. It will also allow you to plan your trip.

Keywords: energy efficiency management, energy efficiency monitoring, energy efficiency audits
p. 91 pobierz
9 vol. 6, iss. 6/9

Sara GRUSZKA, Mariusz J. LIGARSKI
Evaluation of the efficiency of the production process on the example of a manufacturer of steel connectors

Abstract: The paper presents basic information on the evaluation of the efficiency of the production process. An example of Key Performance Indicators (KPIs) used by the manufacturer of steel connectors is presented. A set of financial and non-financial indicators and how they are calculated are presented. The results were analyzed. An attempt was made to evaluate the use of KPIs to examination the efficiency of the manufacturing process. The advantages and disadvantages of the applied approach were determined.

Keywords: efficiency, production process, Key Performance Indicators (KPIs), financial indicators, non-financial indicators
p. 102 pobierz
10 vol. 6, iss. 6/10

Jarosław GRZESIEK
Change management procedurs through the product engineering change orders

Abstract: If the company is large, any new change in the product is the risk of a collision between versions and consequently leads to manufacturing mistakes. Using small-business document management methods used in large enterprises can lead to over-formalisation of the design process and, consequently, deprivation of flexibility.

Keywords: managing changes in the product, engineering change orders
p. 110 pobierz
11 vol. 6, iss. 6/11

Patrycja HĄBEK
Relations with stakeholders in a socially responsible company. The case of car manufacturer

Abstract: This article shows the important role that plays stakeholder relations in a socially responsible company. Stakeholder theory is the basis for the interpretation of the concept of social respon-sibility. Therefore, it is not possible to run a socially responsible enterprise without identifying and responding to the needs of its stakeholders. In this article, the author discusses the main assumptions of stakeholder theory and major stakeholder typologies. An example of a car manufacturer is showing how to build and manage relationships with stakeholders and, in particular, the process of communicating and gaining feedback from stakeholders.

Keywords: corporate social responsibility, stakeholders, CSR reporting, communication
p. 120 pobierz
12 vol. 6, iss. 6/12

Jan KAŹMIERCZAK, Kinga STECUŁA
Problem of preparing students to study in the field of "Management and Production Engineering" in the field of basic technical knowledge - case study

Abstract: The subject of this article is to indicate the problems of preparing the first year of the first-degree students for studying in "Management and Production Engineering", especially in the field of basic technical knowledge and "technical" thinking. The experiences and thoughts of authors, referred to the mentioned problem, as well as proposed teaching methods and evaluation measures are presented in the article on the example of a particular subject of studies, implemented at the Faculty of Organization and Management of the Silesian University of Technology, which is named as "Intro-duction to technology". The introductory part of the article shows the conditions and premises that were the starting point for the development of the above-mentioned program. Next, the second chapter, presents the content of the course and the rules of the student's credit for the subject matter covered by the lectures. Chapter 3 discusses the concept and manner of implementing in the design classes provided for in the program of the subject. Chapter 4 is a collection of practical observations and conclusions, related to conducting both lectures and laboratory classes and student credit. The proposals formulated in the summaries concern, in particular, the preparation of didactic materials for the area of education discussed in the article, but also the needs and possibilities of using the experiences presented in the article, also in the education of non-technical students.

Keywords: preparation of students, technical studies, modern engineering education
p. 129 pobierz
13 vol. 6, iss. 6/13

Dorota KLIMECKA-TATAR
Problems in organization of the service and manufacturing process in the system patient - dentist - dental technician

Abstract: The implementation of specialized service processes is subject to a large range of requirements and obligations, starting with legal requirements, broad expertise, through experience, pra-ctice and commitment. This article presents the problems that may arise in the implementation of services whose success depends on the result of the manufacturing subprocess - on the example of dental treatment requiring the design and manufacture of dental prostheses.

Keywords: process visualization, service process, information flow
p. 141 pobierz
14 vol. 6, iss. 6/14

Artur KUBOSZEK
Validation of computer simulation methods in the study of railway noise

Abstract: The article presents examples of the use of computer simulation methods acoustic phenomena in the process of strategic noise maps. The article presents a comparison of test results obtained in computer simulations and measurements in the environment.

Keywords: noise simulation methods, noise map
p. 149 pobierz
15 vol. 6, iss. 6/15

Elżbieta MILEWSKA
Ability to adaptation of manufacturing companies

Abstract: Advantage over the competitors can be achieved by adapting the organization to changing business conditions and reorganizing business processes. Managing workflows is a particularly important skill for making efficient use of available enterprise resources. Enhancing the efficiency of coordination of operational tasks and gaining the flexibility of the manufacturing process can be realized through the implementation of integrated information systems supporting production management.

Keywords: flexibility, control, manufacturing, uncertainty
p. 159 pobierz
16 vol. 6, iss. 6/16

Witold NAWROCKI, Roman STRYJSKI, Waldemar WOŹNIAK
A method for improving the efficiency of production processes at Toyota Motor Manufacturing Poland

Abstract: The article presents real case study example how Maintenance Department from Toyota Motor Manufacturing Poland reduce defective parts ratio and improve production line availability in a mass production. The text shows how to use in practice “cabbage patch” methodology to improve process parameters and develop problem solving process.

Keywords: Toyota Production Systems, „cabbage patch”
p. 167 pobierz
17 vol. 6, iss. 6/17

Victor NORDIN, Elisabeta KHASAN
РDevelopment of strategy of sales enterprise

Abstract: The increase in sales can be seen as a strategic objective of the trading company. The article analyzes the key elements of the strategy, the stages of its development, position in the market. Carried out the ranking of directions of increase of efficiency. The application of the recommendations leads to increased competitiveness.

Keywords: sales strategy, commercial enterprise, algorithm development strategy, performance in-dicators, ways of increasing efficiency
p. 177 pobierz
18 vol. 6, iss. 6/18

Dorota PALKA
Analysis of the impact of the use of modern production systems in the advertising clothing industry

Abstract: This article addresses the subject matter in the discipline of production engineering, and is concerned with modern production methods in the advertising clothing industry. In particular, the focus was on machinery used in this industry. An analysis of the technological line for the production of prints was carried out. The selected print production methods in the sample manufacturing com-pany are discussed. The advantages of using modern production machinery in terms of market competitiveness, employee safety and technical support are highlighted. The comparative analysis of production in the company before and after the introduction of modern machines was also performed.

Keywords: modern systems, production engineering, advertising clothing
p. 186 pobierz
19 vol. 6, iss. 6/19

Dorota PALKA, Andrzej WIECZOREK
Technical progress – the selected problems and solving them

Abstract:This article is about reflection on the development of technology and its impact on society. Based on a review of literature and their own observations, the positive and negative effects of technological progress have been summarized. Special attention has been paid to the issue of technical barriers and threats, especially to the older people. Due to the large number of weaknesses, attempts to develop a model of sustainable technological progress and public awarenesshave been made. In addition, solutions to problems related to the introduction of broadly understood technical innovations were proposed. The article based primarily on the review of literature is a reflection on progressive problems as well as a starting point for fur-ther research.

Keywords: sustainable development, technology, 3rd age university
p. 194 pobierz
20 vol. 6, iss. 6/20

Jacek SITKO
Analysis selected aspects of production insulating products

Abstract: This article analyzes selected problems of quality level thermal insulation products in an industrial enterprise. The study includes a number of technological, material, organizational and other factors that may influence quality of thermal insulation used in industrial and individual construction. The most important factors influencing the quality of products have been detected and systematized according to materiality level.

Keywords: material, product, isolation, defect
p. 202 pobierz
21 vol. 6, iss. 6/21

Robert SKLORZ, Łukasz PUZIO, Jarosław BRODNY
Impact of selected environmental and flight data parameters on fuel consumption of the jet transport aircraft – initial analysis

Abstract: Every enterprise aims at maximizing economic yield, including air carrier enterprises. Optimization of direct operating costs related to aircraft operation is a key contributor to economic yield. Fuel consumption constitutes the biggest single direct operating cost for all air carriers, therefore its optimization is of utmost importance. Identification of environmental factors and flight data parameters affecting it is crucial. This article presents initial analysis of selected environmental factors and flight data parameters influencing fuel consumption for distinctively selected flight phases. Analysis given below should be treated as preliminary, giving introduction to the more ad-vanced elaborations.

Keywords: jet transport aircraft, fuel consumption, flight data parameters, flight phases
p. 209 pobierz
22 vol. 6, iss. 6/22

Bartosz SZCZĘŚNIAK
Support the process of timetable scheduling for an educational course – timetable verification

Abstract: The article presents solutions applied to verify the correctness of a timetable being developed using an IT tool supporting the process of timetable scheduling for an educational course. The tool being addressed was originally created in a spreadsheet by following the author’s signature con-cept of “Microtools Based on the Relational Data Model”. In the part dedicated to establishing the functionality assumed for the solution in question, main conditions to be satisfied in order for the timetable to be verified as correct have been determined. The data structure identified for the pro-blem analysed has been illustrated using the Entity Relationship Diagram in line with the CASE Method. The manner in which this structure is implemented in a spreadsheet has been discussed. The most important section of the study provides a detailed description of the proposed solutions enab-ling verification of all the pre-defined conditions. In closing paragraphs of the article, all spreadsheet elements which enabled the assumed functionality to be achieved have been identified.

Keywords: process improvement, data base, spreadsheet, information process
p. 222 pobierz
23 vol. 6, iss. 6/23

Radosław WOLNIAK
Software for computer-aided QFD

Abstract: The paper presents issues related to computer aided QFD. The purpose of this article is to analyze the use of computer aided QFD and to present and compare computer software that can be used for this purpose.

Keywords: QFD, quality design, computer aided computing
p. 234 pobierz
24 vol. 6, iss. 6/24

Radosław WOLNIAK
The Design Thinking method and its stages

Abstract: The paper presents the most important issues related to the concept of Design Thinking. The purpose of the publication was in particular to analyze the stages used in the implementation of Design Thinking in organizations. The article is focused on a detailed analysis of the five-step approach but also outlined a competitive seven-step approach to the problem. The publication also discusses Design Thinking relationships with innovation.

Keywords: innovation, design, design thinking, creativity, innovative approach
p. 247 pobierz
25 vol. 6, iss. 6/25

Radosław WOLNIAK, Bożena SKOTNICKA-ZASADZIEŃ
Advantages of using e-government from the point of view of the disabled on the example of the katowice municipal office

Abstract: The publication presents issues related to the results of research on the use by disabled persons of e-government systems. The aim of the publication is to determine what advantages of using e-government are perceived by disabled people using the services of the Katowice municipal office and what means of communication they most often use in contact with the office. The stud intended also to determine whether and how the type of disability affects the researched issues.

Keywords: disability, public administration, types of disability, communication, service quality
p. 256 pobierz

 

   
© wydawnictwo.panova.pl